Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Cameras Monitors Software Special Purchase
 

Monitors

HR-2000 Monochrome Video Monitor

The HR-2000 series is a high performance, ultra high resolution, multi-line rate monitor. It has been specifically designed for use in instrumentation applications such as military tracking systems, document viewing, medical x-ray and video microscopy.

> Download PDF Spec Sheet > Request Demo > Download Manual


HR-2000 Features and Benefits
  2000+ TV Lines Resolution
Auto-locking Scan Rates from 500 to 1235
Switchable Underscan with Separate Front Panel Controls for Height & Width
Selectable A-B Video Input Channel
Variable Video Enhancement
Separate Data Input Channel
Video Polarity Reversal
Variable Aspect Ratio
50 mHz Bandwidth
Differential Input
DC Restoration
Dynamic Focus

HR-2000 Technical Specifications
ELECTRICAL    
Input Voltage 90 to 135 VAC, 50/60 Hz
180 to 250 VAC, 50/60 Hz
90 watts maximum at 120V RMS
Input Signals  
Video Composite (Channel A or B) 1.0 Vpp nominal (.5V to 2V) Loop thru or switchable to 75 ohm termination
Video Non-composite
(Channel A or B)
7 Vpp nominal (.35V to 1.4V) Loop thru or switchable to 75 ohm termination
Digital Data (ChannelC) TTL compatible input (+1V to +5V white positive) Loop thru or switchable to 75 ohm termination. Channel C internally mixes with A & B
Sync 1 Vpp to 8 Vpp. Sync negative or positive. Polarity selectable with rear panel switch
DIFFERENTIAL INPUT  
Common Mode Rejection 40dB @ 60 Hz to 1 KHz
Common Mode Range 16Vpp @ 60 Hz to 1 KHz
VIDEO AMPLIFIER  
Frequency Response ±1dB, 30 Hz to 50 mHz at full drive
-3dB, 15 Hz to 65 mHz at full drive
Switchable Enhancement Adjustable 0 to +18dB at user specified peaking frequency
Also available at 8, 16, 32 and 50 mHz
Differential Gain Less than 5% for luminance range of 0 to 50 fL.
Input Impedance 15pf in parallel with 22 Kohm. Loop thru or 75 ohm termination.
Resolution Greater than 2000 TV lines horizontal resolution. Center to edge at 50 fL luminance
Grey Scale Greater than 10 shades of grey
HORIZONTAL DEFLECTION  
Frequency Range 15,000 to 37,000 Hz auto locking
Retrace Period 5.5 µs maximum
Overscan 20%-front panel adjustable
Underscan 70%-front panel adjustable
VERTICAL DEFLECTION  
Frequency Range 15 to 200 Hz auto locking
Retrace Period 600 µs maximum
Overscan 20%-front panel adjustable
Underscan 70%-front panel adjustable
Geometry Less than 2% raster height
Linearity Less than 1% raster height over full auto frequency range
Raster Size Regulation Less than 1% change, 0-100% APL
Power Supply Regulation No visible change in brightness, raster size or resolution over the range of 90V to 135V or 180V to 250V RMS line at 50/60 Hz
Temperature and Humidity -0ºC to +50ºC (32º to 95ºF) with 10% to 90% relative humidity, non-condensing
Maximum Usable Brightness Greater than 70 fL
High Voltage Output 18 KV nominal
MECHANICAL  
Dimensions 11-7/8? (H)) x 16-7/8? (W) x 21-5/8? (L)
Weight 50 lbs.
Connectors BNC type with insulated ground
CRT Size 14" diagonal
Standard Phosphor Type (P4) white medium persistence
Home | Cameras | Software | Monitors | Special Purchase
Products | Downloads | Support | Contact | Company | Legal and Privacy
Copyright © 2009 Dage-MTI. All rights reserved. 701 North Roeske Avenue Michigan City, IN 46360
Voice: 219.872.5514 Fax: 219.872.5559